4CH Battery Cycler
BC-4-10-0.2
The 4CH Battery Cycler 10V 20mA is used to simulate battery charging/discharging with CV/CC/CR modes. This board contains 4 isolated cycler channels, each can be set individually. Available range is -10V to 10V for voltage, and -20mA to 20mA for current.
When a negative current is activated, device will draw current from the battery.
The product supports Ethernet TCP and USB-C communication. 1 or multiple board(s) can be used together according to the requirements (based on how many cyclers are needed).
Working mode and voltage / current can be controlled with the software. The voltage and current for each battery can also be measured with the software with built-in 16 bit ADC.
Specifications
- 4 channel in total, shares the same ground.
- Extendable number of channels by adding more boards
- Each channel supports CV, CC, CR charge / discharge modes individually.
- Integrated Voltage and current measurements.
- Software built-in calculation of Battery capacity in Ah/Wh.
Battery Cycler
The 4CH Battery Cycler 10V 20mA is used to simulate battery charging/discharging with CV/CC/CR modes. This board contains 4 isolated cycler channels, each can be set individually. Available range is -10V to 10V for voltage, and -20mA to 20mA for current.
When a negative current is activated, device will draw current from the battery.
The product supports Ethernet TCP and USB-C communication. 1 or multiple board(s) can be used together according to the requirements (based on how many cyclers are needed).
Working mode and voltage / current can be controlled with the software. The voltage and current for each battery can also be measured with the software with built-in 16 bit ADC.
Specifications
- 4 channel in total, shares the same ground.
- Extendable number of channels by adding more boards
- Each channel supports CV, CC, CR charge / discharge modes individually.
- Integrated Voltage and current measurements.
- Software built-in calculation of Battery capacity in Ah/Wh.